Tractor
1. Begin by placing the mower onto the tractor and alinging the mounting brackets with the three-point hitch.
2. Using the lifting arm on your tractor, lift the mower up and insert the lift pins into the three-point hitch.
3. Secure the lift pins by tightening the bolts with an adjustable wrench.
4. Connect the lower link arms to the lower lift arms using the pin and lynch pins.
5. Adjust the lower link arms to your desired height.
6. Make sure the cutting blades of the mower are facing the right direction (usually towards the rear of the tractor).
7. Connect the PTO (Power Take Off) cable from the mower to the tractor.
8. Connect the safety chains to the front hooks of the mower.
9. Check all the bolts, pins, and connections before starting the tractor.
10. Start the engine and check the PTO to make sure it is running properly.
11. Select the correct mower cutting height and begin mowing.