1. Park the tractor on a flat and level surface. Set the parking brake.
2. Raise the 3-point hitch and place a jack stand underneath the center link to support the weight of the lift arm assembly.
3. Loosen the nuts and bolts on the drawbar and lift arms using a socket wrench or impact wrench.
4. Place the pull behind mower attachment to the lift arms.
5. Insert the drawbar into the top hole on the mower attachment.
6. Tighten the nuts and bolts, using the socket wrench or impact wrench, to secure the mower attachment to the lift arms.
7. Remove the jack stand from underneath the center link.
8. Lower the 3-point hitch and make sure the mower attachment is properly attached and secure.
9. Test the mower attachment for proper operation and safety.
And that’s how you install a pull behind mower attachment to your Massey Ferguson!