Tractor
Answer: Splitting a Massey Ferguson 65 tractor can be done in different ways depending on your needs. The most common way to split a Massey Ferguson 65 is to use a tractor accessory called a tractor splitter, or a tractor beam. This device is designed specifically for Massey Ferguson 65 tractors and can be found online at various retail outlets.
To begin the process, you will need to raise the three-point hitch of the tractor, using either the support pins or jacking stands. Depending on the tractor, you may need to remove the rock shaft guard before attempting to attach the tractor splitter. After this is done, slide the tractor splitter into place and secure it with the locking pins.
Next, bolt the tractor’s rear wheels to the tractor splitter. You will need to ensure that the axle has been properly aligned with the axle box. Once the wheels are installed, you can now lower the three-point hitch of the tractor, allowing it to rest on the splitter.
Finally, disconnect the tractor’s power take-off drive shaft from the rear main shaft and then the rear main shaft from the transmission. You should also free up any other connections from the engine or transmission. Now that all of the connections have been released, you are now ready to split your Massey Ferguson 65 tractor.