1. Disconnect the battery and disable the fuel feed valve.
2. Drain the oil from the transmission.
3. Raise the vehicle then secure it with jack stands.
4. Remove the flywheel housing and the drive belts.
5. Disconnect the linkage and release lever, then remove the pressure plate and clutch disc.
6. Check the flywheel for damage or scoring, andMachine the flywheel if necessary.
7. Install the new clutch disc, pressure plate and release bearing assembly, and align them properly with the transmission.
8. Reinstall the flywheel housing and secure it with the fasteners, followed by the drive belts.
9. Refill with the appropriate fluid and reconnect the battery.
10. Test the clutch pedal action and make adjustments as necessary.