Servicing the Massey Ferguson 135 involves a number of steps. To ensure the tractor is properly maintained and in safe working order, these steps should be followed on a regular basis.
1. Check the oil level. The recommended engine oil level is 8-10 litres. To check the oil, remove the dipstick and wipe it off, then reinsert it and pull it out to read the level. Add oil if needed.
2. Change the engine oil. The engine oil and filter should be replaced every 250 hours or once a year. Before removing the old oil, warm the engine up for at least 15 minutes. Drain the oil using the drain plug below the oil filter, and replace it with the recommended engine oil.
3. Inspect the air filter. Check the air filter for dust or water. Clean or replace it if needed.
4. Adjust the brakes. Adjust the brakes every 250 hours or once a year. Disconnect power to the brakes, then loosen the cables and turn the adjusting nuts until the brake pedal has an ideal feel. Reconnect the power before testing the brakes.
5. Check the transmission fluid. The fluid should be checked every 75 hours or once a month to make sure it is full. Replace the fluid if needed.
6. Check the radiator fluid. The coolant level should be checked every 250 hours or once a year. The recommended coolant is a 50/50 mix of antifreeze and water.
7. Check the battery. Clean the battery terminals to ensure no corrosion, and top off the cells with distilled water as needed. Have a professional check the battery if it does not start or hold a charge.
8. Inspect all hoses and belts for cracks and wear. Replace the hoses and belts if necessary.
9. Grease the tractor. Lubricate all the zerk fittings with fresh grease on a regular basis to ensure the tractor runs smoothly.
Following these steps is important to keep your Massey Ferguson 135 running at peak performance.