Tractor
To add hydraulic fluid to a Massey Ferguson 1533 tractor, the first step is to locate the hydraulic fluid dipstick, which is usually located on the right side of the tractor, towards the rear. Once the dipstick is located, remove it and check the fluid level. If it is low, then you will need to —
1. Locate the hydraulic fluid fill cap, which is typically on the side of the hydraulic oil reservoir (or hydraulic tank).
2. Remove the fill cap and use a funnel to slowly and carefully pour hydraulic oil into the reservoir.
3. Once you have added the appropriate amount of fluid, check the level on the dipstick to make sure it is full.
4. Replace the dipstick and refill cap, and then start the tractor to make sure the fluid is circulating properly.