1. Locate the drain plug on the underside of the tractor just in front of the rear axel.
2. Position an oil pan under the drain plug to catch the used fluid.
3. Remove the drain plug and let the used fluid drain. Make sure you have the oil pan in place to avoid a mess.
4. Fill the tractor with new hydralic fluid through the fill cap on the side of the tractor. The fill cap will be level with or slightly above the ground surface.
5. Replace the drain plug after the hydraulic system is filled with the new hydraulic fluid.
6. Start the tractor and allow it to run for a few minutes to give the new fluid time to circulate through the system.
7. Once the new fluid has had a chance to circulate through the system, shut the tractor off and check the fluid level. Top off the fluid if necessary.