1. Park your Massey Ferguson 471 in a level spot, and activate the parking brake.
2. Open the hood and locate the brake fluid fluid reservoir. It is typically near the brake master cylinder.
3. Visually check the fluid level and make sure it is full.
4. If it is low, use a suction pump or suction can to add the correct type of brake fluid to the reservoir.
5. Check the brake lines for signs of leaks and repair as needed.
6. Check the brake pads for wear. If they are worn or damaged, replace them.
7. Finally, start the engine and apply the brakes firmly to ensure proper brake operation.