Setting Massey Ferguson Haybaler 1285 is a simple process that can be done in a few steps.
1. Begin by adjusting the trailed accessory drawbar so that it is positioned at the correct height.
2. Set the main drawbar between the tractor and the baler to the correct setting. The main drawbar should be raised slightly to allow the baler to connect more easily to the tractor.
3. Connect the baler’s power takeoff shaft to the tractor’s power takeoff shaft. Make sure the PTO speed setting on the tractor’s dashboard is correct according to the baler’s specifications.
4. Attach the baler’s tongue onto the drawbar and secure it firmly into place.
5. Adjust the bale size by setting the roller tension control to the desired setting. Make sure to account for the type and size of hay being used when adjusting this setting.
6. Adjust the bale size with the bale setting bar. Adjust the bar to a wider position if the hay is coarse or damp, and narrow if the hay is fine or dry.
7. Turn on the PTO and check that all of the machine’s systems are operational.
8. To start baling, manually spread the hay onto the machine’s pickup and start the baling process by engaging the PTO.
Note: Always refer to the owner’s manual before attempting to set up the machine.