1. Ensure that the baler is set up properly. Check that all of the belts, chains and linkages are in the correct positions and well-lubricated.
2. Mount the PTO shaft. With the tractor engaged and in the right gear, start the baler in a low gear and when the PTO is engaged, it will start to turn.
3. Adjust the belt tension. Once the PTO is engaged, the roller should remain stationary and the baler will start to pick up speed slowly. Make sure the belts are adjusted properly and that there is no slippage.
4. Set the time for baling. This can be done with the tractor PTO lever or the levers on the baler itself. When set to the desired time for baling, the baler will begin to run the feeder roller, collect grass and hay and form bales.
5. Monitor the baler’s performance. Check for any slack in the belts or chains, as well as any clogs or jams in the machine.
6. Shut the baler off when done. When the bale has been formed and successfully ejected, turn the baler off and be sure to secure the latch to avoid accidents.