Ford 1310 Specs & Review

Ford 1310 Tractor Specifications
Manufacturer Ford
Model 1310
Drive Type 2WD or 4WD
Manufacturing Period 1983 to 1986
Engine Shibaura S753 three-cylinder water-cooled diesel engine
Maximum Power 19.1 Hp (14.2 kW)
Maximum Torque 53 Nm (39 lb-ft) at 1800 rpm
Transmission Type 1 12×4 unsynchronized gear transmission
Transmission Type 2 12×4 partially synchronized transmission
Maximum Forward Speed 11.9 mph (19.2 kph)
Maximum Reverse Speed 9.8 mph (15.8 kph)
Hydraulic System Open center with gear pump, fluid flow of 6.4 gpm (24.2 lpm), and pressure of 147 bar (2135 psi)
Wheelbase 63″ (1600 mm)
Compatible Attachments 60″ mid-mount 3-blade mower deck, 48″ or 59″ rear-mount 3-blade mower deck with hydraulic lift, 48″ or 60″ rear-mount two-stage snowblower with hydraulic lifting system, Ford 770A front end loader, Ford 770B front end loader, and Ford 757A backhoe with max digging depth of 76.5″ (1940 mm)

FAQ – Ford 1310 Tractor Troubleshooting

Engine Troubleshooting

Q: Why won’t the engine start or is hard to start?

A: Check for a clogged fuel filter, air in the fuel system, faulty fuel injectors, or poor cylinder compression.

Q: Why does the engine shut off while driving?

A: Ensure the engine is warmed up to the recommended temperature, check for air in fuel pipes, or inspect the fuel injectors.

Q: Why does the diesel engine stall after starting?

A: Check the fuel injection pump timing, fuel filter, and fuel injector nozzles.

Electrical System Troubleshooting

Q: Why won’t the battery charge?

A: Inspect for a faulty battery cell, damaged battery wire harness, or loose/corroded cables and terminals.

Q: Why does the starter crank slowly?

A: The battery voltage might be low, or the battery wiring harness could be damaged.

Transmission Troubleshooting

Q: Why is shifting hard?

A: The clutch might be unadjusted or worn, or there could be issues with the gear shift linkage.

Q: Why is the transmission noisy?

A: Check for cracked or worn bearings, low transmission oil level, or improper backlash.

Hydraulics Troubleshooting

Q: Why is the hydraulic system overheating?

A: Ensure the hydraulic system pressure is adjusted correctly, check the main relief valve, and inspect the hydraulic fluid.

Q: Why is the 3-point hitch not raising or raising very slowly?

A: Check the hydraulic oil level, hydraulic fluid filter, and the hydraulic pump.

Steering System Troubleshooting

Q: Why is the steering wheel difficult to turn?

A: Inspect the steering column, check for air in the steering system, and ensure the toe-in is adjusted correctly.

Q: Why does the tractor pull to the right or left?

A: Check the tire pressure, toe-in adjustment, and inspect the steering tie-rod ends or linkage.

The Ford 1310 is a compact utility tractor manufactured by Shibaura. Available in both 2WD and 4WD configurations, this model was produced from 1983 to 1986, making it a classic choice for many farmers and agricultural enthusiasts.

Key Specifications:

The tractor is powered by a Shibaura S753 three-cylinder water-cooled diesel engine, boasting a maximum power of 19.1 Hp (14.2 kW) and a torque of 53 Nm (39 lb-ft) at 1800 rpm. It offers two types of transmissions: a 12×4 unsynchronized gear transmission and a 12×4 partially synchronized transmission. The tractor’s wheelbase stands at 63″ (1600 mm).


With its robust engine and versatile transmission options, the Ford 1310 delivers reliable performance. It can achieve a maximum forward speed of 11.9 mph (19.2 kph) and a reverse speed of 9.8 mph (15.8 kph), making it efficient for various tasks around the farm.


The Ford 1310 comes with an open center hydraulic system equipped with a gear pump, ensuring smooth operation of attachments. Speaking of attachments, this model is compatible with a range of them, including a 60″ mid-mount 3-blade mower deck and a Ford 757A backhoe with a maximum digging depth of 76.5″ (1940 mm).


While the Ford 1310 is generally considered reliable, like any machinery, it can face issues. Common problems might include engine starting difficulties or hydraulic system overheating. However, with regular maintenance and timely troubleshooting, these issues can be addressed effectively.

Value for Money:

Given its range of features, performance, and versatility, the Ford 1310 offers good value for money. When compared to similar models in its class, it stands out for its robust engine and compatibility with various attachments.

Pros and Cons:

  • Pros: Versatile transmission options, compatibility with multiple attachments, robust engine performance.
  • Cons: Potential for common engine and hydraulic issues, might require regular maintenance for optimal performance.

Best Suited For:

The Ford 1310 is best suited for small to medium-sized farms, given its compact size and power. It’s ideal for tasks like mowing, tilling, and light hauling. Its performance is consistent across different terrains, making it a versatile choice for various agricultural needs.

The Ford 1310 is a classic tractor that offers a blend of power, versatility, and reliability. While it might have its set of challenges, with proper care and maintenance, it can be a valuable asset to any farm. For those looking for a compact tractor with a rich history and proven performance, the Ford 1310 is a commendable choice.