Ford 1710 Specs & Review

Ford 1710 Tractor Technical Specifications
Manufacturing Period 1983 to 1986
Engine Shibaura H843 three-cylinder liquid cooled diesel engine
Transmission Unsynchronized transmission with 12 forward and 4 reverse gears, or 12×4 partially synchronized gear transmission
Engine Capacity 85.2 cubic inches (1.4 L)
Cylinder Bore 3.31″ (84 mm)
Piston Stroke 3.31″ (84 mm)
Rated Power 26 hp (19.4 kW)
Maximum Travel Speed 12.5 mph (forward) and 8.7 mph (reverse)
Hydraulic System Flow Rate 7.8 gal/min (29.5 l/min)
Hydraulic System Pressure 2135 psi (147 bar)
Wheelbase 63″ (1600 mm)
Compatible Attachments Mid-mount Ford 915 mower deck, rear-mount Ford 715 snowblower, Ford 770A front end loader

Ford 1710 Tractor FAQ

Why doesn’t my Ford 1710 Tractor’s engine start or starts hard?

There could be several reasons for this issue:

  • Plugged fuel filter – Consider replacing the filter element.
  • Fuel is not supplied from the tank to the system – Check the fuel shut-off valve.
  • Air in fuel lines – You might need to bleed the fuel lines.
  • Clogged or damaged injectors – Consider changing the fuel injectors.
  • Fuel injection pump is broken – Repair or replace the injection pump.
  • Bad engine compression – Inspect the cylinder block and change defective components.

Why does the engine stop during operation?

This could be due to:

  • Engine not being warmed up – Ensure you warm up the engine.
  • Air in fuel pipes – Bleed the fuel pipes.
  • Irregular fuel injection – Adjust the fuel injection timing.
  • Fuel filter plugging – Clean or replace the filter.
  • Dirty or damaged injectors – Consider changing the fuel injectors.

Why does the diesel engine start but suddenly stop?

Possible causes include:

  • Unadjusted fuel injection pump timing – Check the fuel injection pump timing setting.
  • Fuel filter clogging – Replace the filter element.
  • Fuel injector nozzles are clogged or faulty – Change or clean the injector nozzles.
  • Defective fuel injection pump – Repair or replace the injection pump.
  • Air cleaner element is clogged – Replace or clean the air cleaner element.

Why is there a power loss in the engine?

Reasons for power loss can be:

  • Clogged or damaged injectors – Check and replace if required.
  • Fuel injection pressure is wrong – Adjust to the proper level.
  • Air filter is dirty – Replace or service the air filter element.
  • Oil filter element is dirty – Clean or replace the engine oil filter element.
  • Engine is overloaded – Reducing the load is recommended.

Why won’t the battery charge?

Issues with battery charging can arise due to:

  • Bad battery cell – Consider using a new battery.
  • Battery cable harness failure – Check for defects and replace or repair.
  • Loose or corroded battery terminals and cables – Ensure they are tightened or cleaned.
  • Belt slipping or wrong belt tension adjustment – Adjust belt tension properly or change the belt.

Why is the gear shift hard?

This could be due to:

  • Worn or misadjusted clutch – Adjust or change the clutch.
  • Damaged or loose gear shift linkage – Replace or repair the shift linkage.
  • Shift forks being damaged or worn – Change the defective shift forks.
  • Faulty gear shifting mechanism – Replace the faulty parts.

Why is the hydraulic system overheated?

Overheating can be caused by:

  • Improper pressure in the hydraulic system – Proper adjustment is required.
  • Unadjusted or defective main relief valve – Adjust or replace as necessary.
  • Contaminated hydraulic fluid – Consider changing the hydraulic fluid.
  • Air trapped in the hydraulic system – Inspect the suction line, pump seals, and fittings.

Why is the steering wheel hard to turn?

Steering issues can arise from:

  • Broken or improperly installed steering column – Ensure proper installation or replacement.
  • Air leaks in the steering system – Bleed the air.
  • Incorrect toe-in adjustment – Ensure correct adjustment.
  • Improper tire pressure – Inflate tires as required.
  • Worn steering pump – Repair or replace the steering pump.

Why does the tractor pull to the right or left?

Pulling issues can be due to:

  • Low tire pressure – Ensure tires are inflated properly.
  • Incorrect toe-in adjustment – Adjust toe-in properly.
  • Worn steering tie-rod ends or linkage – Replace the failed component.
  • Worn steering gear box components – Replace the defective components.
  • Faulty or worn power steering control valve – Repair or replace as required.

The Ford 1710 Tractor is part of the Ten compact series of compact utility tractors. Manufactured between 1983 to 1986, it’s powered by a Shibaura H843 three-cylinder liquid-cooled diesel engine.

Key Specifications:

  • Engine: Shibaura H843 three-cylinder liquid cooled diesel engine.
  • Transmission: Unsynchronized transmission with 12 forward and 4 reverse gears or a 12×4 partially synchronized gear transmission.
  • Engine Capacity: 85.2 cubic inches (1.4 L).
  • Cylinder Bore: 3.31″ (84 mm).
  • Piston Stroke: 3.31″ (84 mm).
  • Rated Power: 26 hp (19.4 kW).
  • Maximum Travel Speed: 12.5 mph (forward) and 8.7 mph (reverse).

The Ford 1710 Tractor offers a robust performance with its 26 hp engine. Its maximum travel speed, both in forward and reverse, ensures efficient movement across fields. The tractor’s transmission options also provide flexibility in various terrains and tasks.

The tractor boasts an open center hydraulic system with a gear pump that has a flow rate of 7.8 gal/min (29.5 l/min). It’s also compatible with various attachments like the mid-mount Ford 915 mower deck, rear-mount Ford 715 snowblower, and the Ford 770A front end loader.

Ford is a trusted name in the tractor industry, and the 1710 model is no exception. While it’s essential to maintain and service the tractor regularly, its build and design ensure longevity and consistent performance.

Value for Money:
Given its specifications and the brand’s reputation, the Ford 1710 Tractor offers good value for money. However, a direct comparison with other models in its class would provide a more comprehensive perspective.

Pros and Cons:

  • Pros: Reliable performance, compatibility with multiple attachments, efficient hydraulic system.
  • Cons: Limited to the specifications of its time, might lack some of the modern features available in newer models.

Best Suited For:
The Ford 1710 Tractor is ideal for medium-scale farming tasks and can handle various terrains. Its compatibility with different attachments also makes it suitable for diverse agricultural activities, from mowing to snow blowing.

The Ford 1710 Tractor stands as a testament to Ford’s commitment to quality and performance. While it might not have the latest features seen in newer models, its reliability and versatility make it a worthy choice for those in need of a compact utility tractor.