Tractor
Answer: The Massey Ferguson 236 tractor is a versatile and powerful piece of farm equipment. It is most commonly used for farming, landscaping and construction projects. To ensure that the Massey Ferguson 236 is used safely and correctly, here are some key tips:
1. Familiarize Yourself With The Tractor And Its Features
Before you start operating the Massey Ferguson 236, read the owner’s manual and become familiar with the controller and the controls. The manual provides information on how to check the oil, fuel, and coolant levels as well as how to start and stop the tractor. Pay attention to any safety precautions and make sure you understand them.
2. Start The Tractor
Make sure the transmission levers are placed in the “neutral” position and the park brake is engaged before you start the Massey Ferguson 236. To start the tractor, place the key in the ignition and rotate the key one-quarter of a turn to the left. Once the engine starts, raise the engine speed until it reaches the recommended RPM for the load, typically between 1100 and 1300 RPM.
3. Operate The Tractor
When moving the Massey Ferguson 236, it is important to remember to keep arms, legs, and feet away from the moving parts and the exhaust. A good practice is to always keep these parts at least two feet away from the tractor.
Before turning the tractor, move the differential lock lever to the “lock” position to reduce the risk of the tractor tipping over when turning on an incline.
When raising or lowering the 3-point hitch and the loader, you will need to use the control levers located on the right side of the dashboard. To raise the 3-point hitch, press the lower of the two levers; to lower the hitch, push the upper lever. To raise or lower the bucket or other attachment, use the secondary lever located on the top.
4. Turn Off The Tractor
When you have completed your work, reduce the engine speed to idle, place the transmission levers in the neutral position, and disengage the differential lock lever. Move the parking brake lever from the “set” to “release” position and rotate the key one quarter turn to the right to turn off the tractor.