For Removing the Gland on a Massey Ferguson Loader, you will need to following tools and equipment:
1. Gloves
2. Safety glasses
3. Wrench (appropriate size for the bolts)
4. Screwdriver
5. Grease or oil
6. New gland or seal
Once all the necessary tools and equipment are gathered, you can begin the procedure:
1. Make sure all the hydraulic lines are disconnected and that the plug is removed from the cylinder head.
2. Put on your gloves and safety glasses before beginning.
3. Make sure to place a container or pan under the gland to catch any leaked fluid.
4. Unscrew the bolts or nuts that attach the gland to the loader.
5. Carefully remove the gland from the loader.
6. Once the gland is removed, you should check the condition of the seal and replace if needed.
7. Apply grease or oil to the new seal and insert it into the loader.
8. Tightly secure the gland back to the loader using the appropriate sized bolts or nuts.
9. Reconnect the hydraulic lines and install the plug.
10. Finally, check for any leaks.
When the procedure is completed, your Massey Ferguson loader should be ready to go.